Home > News

products

Piston Ring
Piston
bearing
Timing Kit
Cylinder Liner
Crankshaft
Marine piston ring
Timing chain cover
Cylinder Head
DPF

Wide application of crankshaft CNC horizontal lathe

2021-01-27


DANOBAT NA750 crankshaft thrust surface finishing lathe is equipped with an automatic detection device. After the parts are clamped, the probe automatically detects the width of the thrust surface and determines its center line, which is used as the processing benchmark and is based on the processing conditions of the previous crankshaft Automatic compensation is carried out to realize the finishing machining of the two sides of the thrust surface with the center line as the machining reference and equal margin. After the turning is completed, the width of the thrust surface is automatically detected, and the small end and groove processing are completed at the same time.

After the turning is completed, the turning tool is retracted, the rolling head is extended, and the two ends of the thrust are rolled at the same time. When rolling, the rolling surface has good lubrication. NA500 precision turning flange end face and groove machine tool is equipped with an automatic detection device. After the parts are clamped, the probe automatically detects the distance from the thrust surface to the flange end surface. X-axis positioning accuracy is 0.022mm, repeating positioning accuracy is 0.006mm, Z-axis positioning accuracy is 0.008mm, repeating positioning accuracy is 0.004mm .